MaxFire XFPS converter for Xbox one

MaxFire XFPS converter for xbox one

中文說明書

Maxfire XFPS converter for Xbox one

Usage manual

 

Ⅰ. Product function:

 

● Compatible with Xbox one TM consoles

● Automatically matches with newer different type of mouse and keyboards (wireless or wired), 99% compatible rate

● Compatible with most USB keyboard and mouse combinations.

● Works with a single USB nano-receiver for mouse and keyboard.

● Map any keys from Xbox one/Xbox 360TM /PS3TM controller to any keys on the keyboard.

● Able to set multi-key functions into a key. Press this key to execute the special function, etc like drop aim, drop shot, active reload, auto burst, etc.

● Able to set the rapid fire function onto the mouse, keyboard and Xbox one/Xbox 360/PS3 wired controller.

● Compatible with PS3TM controller Six-Axis tilt function

● Connecting to the USB hub with 4 wired controllers plugged in, you are able to divide/share the controller’s control command to the other 3 controllers. The Maxfire XFPS converter can support up to 10 USB accessories plugged in, share the controller’s control command to your partners, friends or family. Have more fun!

● Super high sensitivity precision and smoothness

● Adjust the mouse sensitivity from 2 extra wheels with 16 levels of adjustment for X and Y sensitivity to perfectly adapt to every mouse.

● Ideal for use with all FPS titles such as all COD games, Ghosts etc.

● Instant plug and play technology

● No need to connect to PC

 

Ⅱ. Device introduction:

Screen Shot 2013-12-25 at 9.04.21 PM

 

<1>—-USB Port

Connect with USB cable <14>.

 

<2>—-X wheel – Adjust the mouse X axis sensitivity.

+ increase the sensitivity of X axis

- lower the sensitivity of X axis

 

<3>—- Y wheel – Adjust the mouse Y axis sensitivity.

+ increase the sensitivity of Y axis

- lower the sensitivity of Y axis

 

<4>—-Rapid fire LED indicator

 

<5>—- Default LED indicator

 

<6>—- Default /SET button

Shift the Default /SET function by each press.

<7>—- “SET” LED indicator.

 

<8>—- “P” Program LED Indicator

 

<9>—- Rapid fire button

 

<10>—- Program button

 

<11>—- USB Port (4 ports)

Xbox one (connect with charge cable) /Playstation 3™ / Xbox 360™ wired controller, mouse and keyboard plugs into these port.

 

<12>—- USB plug(White)

Maxfire XFPS converter USB power cord,connect to Xbox oneTM console。

 

<13>—- USB plug(Black)

Connect to Xbox oneTM console.

 

<14>—- USB plug(Black)

Connect to Maxfire XFPS converter <1> USB port。

 

Ⅲ. How to connect:

 

To use the Maxfire XFPS converter, the official Xbox oneTM controller is required.

1. Plug the Xbox oneTM controller (connect with charge cable) or other devices (PS 3 TM wired controller, wired/wireless mouse and keyboard) into the Maxfire XFPS converter <11> port.

2. Connect/plug our provided USB cable (the <12> and <13>) into the console.

3. Plug the provided USB cable (the <14>) into the Maxfire XFPS converter <1> port, wait until the Guide key stops blinking, the connection is complete. You are able to use the devices connected to the Maxfire XFPS converter.

Screen Shot 2013-12-25 at 9.04.29 PM

 

 

Ⅳ. Rapid fire function:

How to set the rapid fire function:

You are able to activate the rapid fire function on all devices from the Maxfire XFPS converter, for instance to set the rapid fire on the Xbox one controller “A” key.

The method is shown below:

1. Press the Rapid fire button <9>

2. The Rapid fire key LED indicator <4> lights up.

3. Press the “A” key on the controller (the Rapid fire lights off)

4. “A” key’s rapid fire function is enabled

If you set the Rapid fire function on a Xbox oneTM controller “A” button, the plugged PS 3 TM controller (X button) and the keyboard (space bar) has its rapid fire function enabled too. Please check the Default configuration chart below.

Screen Shot 2013-12-25 at 9.04.34 PM

If you want to remove the rapid fire function on “A”, simply repeat the steps above.

 

If you want to erase the rapid fire function on ALL buttons/keys

Step is shown below:

1. Press and hold the Rapid fire key<9>

2. Wait until the Rapid fire light <4>begins to blink

3. After a few seconds the Rapid fire key <4>lights off

4. Release the Rapid fire key<9>. Now Rapid fire functions on all keys are removed.

 

The rapid fire function is not saved on the Maxfire XFPS converter after the console shuts down.

 

Ⅴ. How to use the tilt functionality:

 

Connect the Maxfire XFPS converter to the PS 3 controller; you are able to use the PS 3 tilt function to replace the Xbox One analog stick function.

a. For example, if you want to use the tilt function of the PS 3 controller to replace the function on the Left analog sticks on the Xbox One controller.

 

1. Switch the button to “DEFAULT” (on Maxfire XFPS converter)

2. Press “P”<10> (on Maxfire XFPS converter), “P” button LED<8> lights up.

3. Press the PS3 TM Left D pad direction

4. Press “P” <10> again, (“P” button LED <8> lights off), now the tilt function on PS 3 replaces the function on the Left analog stick of Xbox One controller

 

Repeat the same steps to swap both functions between the tilt function on PS 3 controller and the function on the Right analog stick of Xbox One controller.

Screen Shot 2013-12-25 at 9.04.38 PM

 

 

b. How to remove the PS 3 controller tilt settings.

 

1. Switch the button to “DEFAULT” <6> (on Maxfire XFPS converter)

2. Press “P”<10> (on Maxfire XFPS converter), “P” <8> button LED lights up.

3. Press the “P” again<10>, (the “P” button <8>LED light turns off)

4. PS 3 controller tilt setting is removed.

Screen Shot 2013-12-25 at 9.04.42 PM

 

The tilt function does not save on the Maxfire XFPS converter after the console shuts down.

 

Ⅵ. Default configuration chart

 

The table shown below is Maxfire XFPS converter on “Default” mode, the default button mappings on your Xbox one/Xbox 360/PS 3 wired controller, mouse/keyboard.

Screen Shot 2013-12-25 at 9.04.46 PM

 

 

Ⅶ. Custom configuration:

 

A.     To map a single button function onto the keyboard

 

For instance:

a.       If you want to map the “A” button on the Xbox one controller to the keyboard “T” key:

1. Switch to “SET” <6> (on Maxfire XFPS converter)

2. Press “P”<10> (on Maxfire XFPS converter), “P”<8> LED lights up.

3. Press “A” (on Xbox one controller)

4. Press “P” <10> again, (“P” <8> LED indictor starts to blink)

5. Press “T” key (on Keyboard),”P” LED indictor<8> lights off,

6. The function on the “A” button from the controller is set onto the “T” key on the keyboard

Screen Shot 2013-12-25 at 9.04.52 PM

 

 

b.       Erase the “T” function on the keyboard

Step:

1. Switch to “SET” <6> (on Maxfire XFPS converter)

2. Press “P” <10> (on Maxfire XFPS converter), “P” LED indicator <8>lights up.

3. Press “P”<10> again, (“P” LED indicator <8> starts to blink)

4. Press “T” key (on Keyboard)

5. “P” <8> LED indicator turns off (the function on “T” key is removed)

Screen Shot 2013-12-25 at 9.04.58 PM

 

 

B.      To map Multi-buttons’ function on keyboard

a. If you want to map the controller “A B X Y” to a single key on keyboard “F”

Step:

1. Switch to “SET” <6> (on Maxfire XFPS converter)

2. Press “P” <10> (on Maxfire XFPS converter), “P” LED <8> lights up.

3. Press the “A B X Y” buttons in proper order

4. Press “P”<10> again, (“P” LED indicator <8> starts to blink)

5. Press “F” key (on Keyboard)

6. “P” <8> LED indicator turns off, the function of “A B X Y” buttons from controller are set into Keyboard “F”

If you press the “F” key continuously (on Keyboard) it’s the same as pressing “A B X Y” 4 buttons simultaneously.

 

b. Remove this combined mapping mode on the “F” key (on the keyboard)

Step:

1. Switch to “SET” <6> (on Maxfire XFPS converter)

2. Press “P”<10> (on Maxfire XFPS converter), “P” LED indicator <8> lights up.

3. Press “P” <10> button again (“P” LED indicator <8> starts to blink)

4. Press “F” key (on Keyboard)

5. “P” LED indicator <8> lights off (the function on “F” key is removed)

 

C. Remove the entire mapping mode.

1. Switch to the SET <6> button (on the Maxfire XFPS converter).

2. Hold the “P” button down <10>, the “DEFAULT, SET, T, P” LED indicator blinks at the same time.

3. Release the “P” <10> key, all the mapping mode are removed.

Screen Shot 2013-12-25 at 9.05.07 PM

 

 

Note:

If you press “P” <10>, after a few seconds the “P” LED indictor <8> lights off, the device will return back to its default mode.

 

All settings will be remained on the Maxfire XFPS converter (the current game), for your next game play.

 

 

❉ Maxfire XFPS converter software can be upgraded via PC. More information can be found at www.maxbuy.cc