MaxFire converter for Wii U and PS3

Maxfire converter for Wii U™ and PS3™

maxfire converter for ps3

 

 

Maxfire for wii u and ps3 (1) Maxfire for wii u and ps3 (2)
Maxfire for wii u and ps3 (4)Maxfire for wii u and ps3 (5) Maxfire for wii u and ps3 (3)

Maxfire converter for Wii U™ and PS3™

中文用戶手冊

Usage manual

 

Ⅰ. Product function:

 

Maxfire FPS converter Function and feature:

-Compatible with Wii UTM and PS3TM consoles.

-You are able to set multi-key functions into one key. Simply click this key to execute the special game mode, like drop aim, drop shot, active reload, auto burst, etc.

-Automatic matching with newer different type of mice and keyboards (wireless or wired), compatibility rate up to 99%

-If connecting to the USB hub with 4 wired controllers plugged in, you are able to divide/share the controller’s control command to the other 3 controllers. The Maxfire FPS converter can support up to 10 USB accessories plugged in, so you can share the controller’s control command to your partners, friends or family. Have more fun!

-It also works with single USB nano-receiver for both mouse and keyboard.

-Compatible with LogitechTM G13 keyboard.

-You are able to set the rapid fire function to the mouse, keyboard, and PS3 TM /360 TM wired controller.

-Can map any keys from Xbox 360TM /PS3TM controller to any keys on the keyboard and mouse.

-Compatible with most USB keyboard and mouse combinations. Those expensive FPS set-ups have not gone to waste!

-Can adjust the mouse sensitivity from 2 extra wheels with 16 levels of adjustment for X and Y sensitivity to adapt perfectly to every mouse.

-Instant plug and play technology

-Ideal for use with all FPS titles such as all COD games, Black Ops etc.

-Compatible with all PS3TM games

-Compatible with all versions of PS3TM consoles (included PS3TM Slim)

-Super high sensitivity precision and smoothness

-No need to connect to PC

 

Ⅱ. Device introduction:

Screen Shot 2013-06-25 at 9.14.49 AM

 

<1>—- Connect to the Wii™ Remote. (Using the device on Wii UTM console)

 

<2>—- USB Port

Connect with USB cable <15>.

 

<3>—-X wheel – Adjust the mouse X axis sensitivity.

+ increase the sensitivity of X axis

- lower the sensitivity of X axis

 

<4>—- Y wheel – Adjust the mouse Y axis sensitivity.

+ increase the sensitivity of Y axis

- lower the sensitivity of Y axis

 

<5>—- Turbo/Rapid fire LED indicator

 

<6>—- Default LED indicator

 

<7>—- Default /SET button

Shift the Default /SET function by each press.

 

<8>—- “SET” LED indicator.

 

<9>—- “P” Program LED Indicator

 

<10>—- Turbo/Rapid fire button

 

<11>—- Program button

 

<12>—- USB Port (4 ports)

Playstation 3™/Xbox 360™ (The Xbox 360TM wired controller works on the PS3TM console, not on the Wii UTM console ) wired controller, mouse and keyboard plugs into these port.

 

<13>—- USB plug(White)

Device USB power cord,connect to PS3TM/Wii U™ console。

 

<14>—- USB plug(Black)

Connect to PS3TM/Wii U™ console.

 

<15>—- USB plug(Black)

Connect to device <1> USB port。

 

Ⅲ. How to connect:

A. Using on PS3™/PS3™ slim console:

 

1. Plug in the Xbox 360TM wired controller or other devices you want to use on the console, (PS 3 TM wired controller, wired/wireless mouse and keyboard), connect them to the device <12> port.

2. Connect/plug our provided USB cable (the <13> and <14>) into the console.

3. Plug the provided USB cable (the <15>) into the device <2> port.

Screen Shot 2013-06-25 at 9.14.58 AM

 

B. Using on Wii U™ console:

 

First connect the USB cord from device to Wii U™ console, then plug in the Wii™ Remote to the device, after that turn on the Wii™ Remote power, you are now able to use the PS3™ wired controller or keyboard and mouse on Wii U™ console.

Note: the “Maxfire converter for Wii U™ and PS3™” supports the Wii U™ games with the icon Screen Shot 2013-06-25 at 9.15.05 AM or Screen Shot 2013-06-25 at 9.15.08 AM printed. (Please check the game manual before use).

Screen Shot 2013-06-25 at 9.15.18 AM

 

Ⅳ. Rapid fire function:

A. How to set the rapid fire function:

You are able to activate the rapid fire function on all devices from the “Maxfire converter for Wii U TM and PS3TM”. (As using on PS3TM console for example)。if you want to set the rapid fire on the controller “A” key.

The method is as below:

1. Press the Turbo button <10>

2. The Turbo key LED indicator <5>lights up.

3. Press the “A” key on the Xbox 360TM controller (the Turbo light off).

4.  “A” key now has the rapid fire function

If you set the Turbo/Rapid fire function on a Xbox 360TM controller “A” button, the plug in PS 3 TM controller (X button) and the keyboard (space bar) has the turbo/rapid fire function too, please check the Default configuration chart below.

Screen Shot 2013-06-25 at 9.15.24 AM

If you want to remove the turbo function on “A” button, follow the steps shown below.

 

Erase the Rapid fire function on signal button/key.

The method is shown below:

1. Press the Turbo key<10>

2. The Turbo button <5>lights up.

3. Press the “A” key on the Xbox 360TM controller (the Turbo lights off).

4. The rapid fire function on “A” button is removed

 

The turbo/rapid fire function won’t be saved on the device after the console shuts down.

 

Ⅴ. Default configuration chart

 

Maxfire converter for Wii UTM and PS3TM on “Default” mode, the default buttons mapping to your Xbox 360TM/PS 3TM wired controller, mouse/keyboard is shown with a table below:。

Using on PS3™ console:

Screen Shot 2013-06-25 at 9.15.28 AM

 

Using on Wii U™ console:

Screen Shot 2013-06-25 at 9.15.35 AM

 

Ⅵ. Custom configuration:

 

A. For mapping single button function to keyboard

 

For instance:

a. If you want to map the “△” button to the keyboard “T” key

Step:

1. Switch to “SET” <7> (on Maxfire converter for Wii U TM and PS3TM)

2. Press “P”<11> (on Maxfire converter for Wii U TM and PS3TM), “P”<9> LED lights up.

3. Press “△” (on PS3TM wired controller)

4. Press again “P” <11> button, (“P” <9> LED indictor starts to blink)

5. Press “T” key (on Keyboard)

6.”P” LED indictor<9> turns off, now the function “△” button from controller is set to Keyboard “T”

Screen Shot 2013-06-25 at 9.15.46 AM

 

b. Erase the “T” key function on keyboard

Step:

1. Switch to “SET” <7> (on Maxfire converter for Wii U TM and PS3TM)

2. Press “P” <11> (on Maxfire converter for Wii U TM and PS3TM), “P” LED indicator <9> lights up.

3. Press “P”<11> button again, (“P” <9> LED indicator starts to blink)

4. Press “T” key (on Keyboard)

5. “P” <9> LED indicator turns off (the function on “T” key is removed)

Screen Shot 2013-06-25 at 9.15.52 AM

 

B. For mapping Multi-buttons’ function on keyboard.

a. If you want to map the controller “X ○ □ △” to one single key on keyboard “F”.

Step:

1. Switch to “SET” <7> (on Maxfire converter for Wii U TM and PS3TM).

2. Press “P” <11> button (on Maxfire converter for Wii U TM and PS3TM), “P”<9> LED lights up.

3. Press the “X ○ □ △” buttons in proper order.

4. Press again “P”<11> button, (“P” <9>LED indicator starts to blink).

5. Press “F” key (on Keyboard).

6. ”P” <9> LED indicator turns off, now the function of “X ○ □ △” buttons from controller is set to Keyboard “F”.

Now if you press the “F” key (on Keyboard) it’s similar to press down “X ○ □ △” 4 buttons simultaneously.

 

b. Remove this combined mapping mode on “F” key (on the keyboard).

Step:

1. Switch to “SET” <7> (on Maxfire converter for Wii U TM and PS3TM).

2. Press “P”<11> (on Maxfire converter for Wii U TM and PS3TM), “P” <9> LED indicator lights up.

3. Press “P” <11> button again (“P” <9> LED indicator starts to blink).

4. Press “F” key (on Keyboard).

5. “P” <9> LED indicator turns off (the function on “F” key is removed).

 

Remove the entire mapping mode.

Switch to the SET <7> button (on the Maxfire converter for Wii U TM and PS3TM), hold down the button “P” <11>, the T <5>、Default<6>、Set<8> and P<9> LED indicator blinks, release the “P” <11> button, all the mapping mode are removed.

Screen Shot 2013-06-25 at 9.16.25 AM

 

 

C. How to program the keyboard keys.

Maxfire converter for Wii U TM and PS3 TM allow gamers to customise the function of the keyboard keys without the Xbox 360 wired controller or PS 3 controller connected. For instance: under default setting, the keyboard’s Q key is assigned to the PS3 controller L1 button, Wii Classic controller ZL button, to replace the Q key function with the T key on the keyboard, the setting is shown below:

1. Switch to “SET” <7> (on Maxfire converter for Wii U TM and PS3TM)

2. Press “P”<11> (on Maxfire converter for Wii U TM and PS3TM), “P”<9> LED lights up.

3. Press “Q” (on keyboard)

4. Press again “P” <11> button, (“P” <9> LED indictor starts to blink)

5. Press “T” key (on Keyboard)

6. ”P” LED indictor<9> turns off, now the function “Q” key is set to “T” key.

Screen Shot 2013-06-25 at 9.16.31 AM

 

 

Note:

If you press the “P” <11>, after a few seconds the “P” <9>LED indictor lights off, the device will return back to its default mode.

 

All the setting will be remained on the Maxfire converter for Wii U™ and PS3™ (for this currently game), for your next game play.

 

 

❉ Maxfire converter for Wii U™ and PS3™ software can be upgraded via PC. More information can be found at www.maxbuy.cc