Maxgear Cross Fight

日本語取扱説明書

Maxgear Cross fight converter is for xbox 360™ wired controller to be used on Wii U™ or Wii™ console, if you like to use the xbox 360™ controller for the FPS game play, you gotta have one !

 


Maxgear Cross fight (1) Maxgear Cross fight (2)

Usage manual

Screen Shot 2013-03-13 at 9.20.31 PM

Before using this product, read this manual carefully and retain it for future reference.

 

Device introduction:

Screen Shot 2013-03-13 at 9.20.38 PM

 

 

<1> Connect to the Wii™ Remote.

<2> USB port, connect to the Wii™/Wii U™ console.

<3> “-” button.

<4> “+” button.

<5> USB port, connect to the Xbox 360™ controller.

<6> Rapid fire indicator.

<7> Rapid fire button.

How to connect:

First connect the USB cord from Maxgear Cross fight to Wii™ or Wii U™ console, then plug in the Wii™ Remote and Xbox 360™ wired controller to the device (Maxgear Cross fight) , after that turn on the Wii™ Remote power, you are now able to use the Xbox 360™ wired controller on Wii U™/Wii ™console.

Note: the Maxgear Cross fight adapter supports the Wii™ or Wii U™ games with the icon Screen Shot 2013-03-13 at 9.21.03 PMor Screen Shot 2013-03-23 at 1.40.43 PM printed. (Please check the game manual before use).

Screen Shot 2013-03-13 at 9.20.45 PM

 

The default matching table between Xbox 360 wired controller and Wii Classic controller

Screen Shot 2013-03-23 at 1.18.33 PM

 

 

How to use the Rapid fire function:

The Rapid fire function will be enabled on the buttons (A,B,X,Y,RT,LT,RB,LB )once the Xbox 360TM wired controller connected to the Maxgear Cross fight adapter.

If you want to set the A button with rapid fire function, the setting procedure is as below:

1. Press the T button <7> on the device (Maxgear Cross fight), the <6> LED indicator lights up, now press the A button on the 360 wired controller, the <6> LED indicator lights off, the rapid fire function on the A button is enabled, if you want to erase the rapid function on this key, simply repeat the steps again.

Screen Shot 2013-03-13 at 9.21.09 PM

2. If you set the rapid fire function on some of the buttons and you want to remove the function in a go, you have to press and hold the T button <7> on the device for 3 seconds, the <6> LED indicator on the device blinks 3 times, now release the T button <7>, the <6> LED indicator turns off, all the rapid fire function on the buttons are removed.

Screen Shot 2013-03-13 at 9.21.17 PM

 

3. The <6> LED indicator will light up if the rapid fire setting button is pressed.

4. The rapid fire speed can be adjusted via the “+”and“-” button.

There are 4 rapid fire speed level built-in: (Fast, Medium and slow and slowest)

Fast speed    – (50 shots per sec.)

Medium speed – (25 shots per sec.)

Slow speed   – (10 shots per sec.)

Slowest speed -(5 shots per sec.)

 

On the <6> LED indicator lights on status, press the“+”<4> button, the <6> indicator flashes once, the rapid fire speed level will move up to the upper level, if you keep on pressing the “+”<4> button and the LED flashing speed on the <6> LED indicator slows down (slowly flashing), you have reached the Fast speed level.

 

On the <6> LED indicator lights on status, press the“-”<3> button, the <6> indicator flashes once, the rapid fire speed level will move down to the lower level, if you keep  on pressing the “-”<3> button and the LED flashing speed on <6> LED indicator slows down (slowly flashing), you have reached the Slow speed level.

 

Maxgear Cross fight adapter firmware can be updated via PC. More information can be found on our web site www.maxbuy.cc